Voodoo Solar- Lorentz Pumps


Return to HOME page
Return to PUMP page

FULL LORENTZ MANUAL (3.1 mb PDF)

Two Year Warranty on Lorentz pumps

lorentz solar submersible well pumps    Lorentz PS150 Centrifugal Submersible Water Pump

Lorentz PS150 Centrifugal Pump

The PS150 Centrifugal pump is a submersible water pump that requires no maintenance with high life expectancy. It is made from stainless steel and rubber with easy access for service. The PS150 C is cost efficient and simple to install. This pump is most useful for deep well pumping, irrigation, potable water supply, and pond management.

The PS150 C pump is best used for a lift of up to 70 ft and a max flow rate of 1,330 Gal/h (22 gal/min). A solar system that has a nominal voltage of 12-24 VDC is needed to power this pump.

 

7864150, LORENTZ PS150 CENTRIC SJ5-8 SYSTEM (PUMP, MOTOR, CONTROLLER) ..... $1122

Lorentz ps150 C submersible water pump
SPECIFICATIONS
Lorentz PS150 Centrifugal Pump Accessories
Lorentz PS150-Centric Pump Controller
7864501 $253
Lorentz PS150-Centric Controller Boost
7864502 $253
Lorentz Float Switch for PS150 Centric Pumps
7864516 $21

Flow Rates for each Lift dependent on size of Fixed Solar Array (watts). Chart Based on a 4.5 peak sun hours a day. Production is gallons/day at 12 volts (smaller number) & 24 volts (larger number)
LORENTZ PUMP Lift, ft (Max Vertical Distance of Pumped Water)
Submersible Pump
Model 33 50 100 165 230 265 330 460 600 760
PS 150 C (12-24 V)
C-SJ5-8 (gal/day) 3500-
7800
2100-
6600
               

LORENTZ SOLAR PUMPING DIAGRAM:



    Lorentz PS200 HR/C Submersible Water Pump

Lorentz PS200 HR/C Submersible Water Pump

The PS200 HR/C is a submersible water pump that has a high resistance from wear caused by sand or clay and requires no maintenance with high life expectancy. It is made from stainless steel and rubber with easy access for service. The PS200 HR/C is cost efficient and simple to install. This pump is most useful for deep well pumping, irrigation, potable water supply, and pond management.

There are several models of the PS200 HR/C pump that are rated differently for lift and flow rate. All models are powered by solar panels that need to have a nominal voltage of 24 – 48 VDC.

 Please note that the PS200 is available in a 24 volt (1521120) or 48 volt (1526500) package system, but is not always available separately as pump/motor/controller only.  Contact me if you are interested and I will check availability and price with my wholesaler. 

Click HERE for packaged systems with solar panels.

lorentz ps200 hr submersible pump
SPECIFICATIONS

Flow Rates for each Lift dependent on size of Fixed Solar Array (watts). Chart Based on a 4.5 peak sun hours a day. Production is gallons/day at 24 volts (smaller number) & 48 volts (larger number)
LORENTZ PUMP Lift, ft (Max Vertical Distance of Pumped Water)
Submersible Pump
Model 33 50 100 165 230 265 330 460 600 760
PS 200 HR (24-48 V)
HR-04 (gal/day) 480-
1585
430-
1505
190-
1265
340-
790
           
HR-07 (gal/day) 405-
1980
360-
1955
               
HR-14 (gal/day)                    

    Lorentz PS600 HR/C Submersible Water Pump


The Lorentz PS600 submersible water pump is ideal for applications such as drinking water, livestock, pond management and irrigation.

Lorentz has set the standard for economical solar pumping.

The Lorentz pump is meant to be used with a solar array although battery based systems will work as well. Ideally a pole mount or a solar tracker (which can increase water output by 40%-50%) would be used to mount the solar panels to. This means that your water yield could decrease in the winter and cloudy weather, as with any PV-direct pumping system.

Use of a float switch is recommended to prevent tank overflow.

PS 600 BATTERY SIZE CHART


Lorentz PS600 Helical Rotor (HR) Pumps
Helical Rotor Model
Lift (feet) Max. Flow Rate [gal/min] Solar Operation Battery Operation Item Price
HR-03
0-460 2.2 nominal voltage 48-72 V DC
open circuit voltage max. 150 V DC
nominal voltage 48 V DC 7863601 $1,866
HR-03H
460-183 2.2 7863602 $1,866
HR-04
0-262 3.5 7863603 $1,866
HR-04H
262-460 3.5 7863604 $1,866
HR-07
131-322 5.3 7863605 $1,866
HR-10
98-197 8.3 7863606 $1,866
HR-14
0-164 11.8 7863607 $1,866
HR-20
0-99 15.8 7863608 $1,866

Lorentz PS600 Centrifugal Pumps
Centrifugal Model
Lift (feet) Max. Flow Rate [gal/min] Solar Operation Battery Operation Item Price
C-SJ5-8
0-82 33 nominal voltage 48-72 V DC
open circuit voltage max. 150 V DC
nominal voltage 48 V DC 7863618 $1,866
C-SJ8-5
0-60 48 7863619 $1,866

Lorentz PS600 Accessories
Lorentz PS600 Pump Accessories
Description Item Price
Lorentz PS600 Pump Controller 48-72 VDC
Controls the pump system and monitors the operating states. 7864504 $607
Lorentz PS Boost EZ Install Kit
EZ Install Kit 7864515 $125
Splice kit
Lorentz 4-wire splice kit 7864517 $12.75
Probe Sensor
Lorentz Well Probe Sensor 7864513 $60.00
Lorentz AC Power Pack
AC Power Pack 115/230 VAC to DC converter 7864514 $475
Lorentz PV Disconnect
PV Disconnect 200V/20a 7864512 $162

Flow Rates for each Lift dependent on size of Fixed Solar Array (watts). Chart Based on a 4.5 peak sun hours a day. Production is gallons/day at 48 volts (smaller number) & 72 volts (larger number)
LORENTZ PUMP Lift, ft (Max Vertical Distance of Pumped Water)
Submersible Pump
Model 33 50 100 165 230 265 330 460 600
PS 600 HR/C (48-72 V)
HR-03 (gal/day)         600 500-
740
290-
630
180-
680
 
HR-03H (gal/day)                 260-
400
HR-04 (gal/day)     1300 920-
1300
925-
1180
       
HR-04H (gal/day)           790-
1000
680-
1400
660-
1100
 
HR-07 (gal/day)       1400 1580-
2300
1300-
2000
     
HR-10 (gal/day)                  
HR-14 (gal/day) 3100-
4400
2900-
3900
1500-
5200
2100-
3400
         
HR-20 (gal/day)                  
C-SJ5-8 (gal/day) 5800 4700-
6600
             
C-SJ8-5 (gal/day) 9500-
12000
7900              

lorentz solar submersible well pumps    Lorentz PS1200 HR/C
 Submersible Water Pump

Lorentz PS1200 HR/C Submersible Water Pump

The PS1200 HR/C is a submersible water pump that has a high resistance from wear caused by sand or clay and requires no maintenance with high life expectancy. It is made from stainless steel and rubber with easy access for service. The PS1200 HR/C is cost efficient and simple to install. This pump is most useful for deep well pumping, irrigation, potable water supply, and pond management.

There are several models of the PS1200 HR/C pump that are rated differently for lift and flow rate. All models are powered by solar panels that need to have a nominal voltage of 72 – 96 VDC or 6-8 12V solar panels.

lorentz 600 submersible well pump
SPECIFICATIONS
Lorentz PS1200 Helical Rotor (HR) Pumps
Helical Rotor Model
Lift (feet) Max. Flow Rate [gal/min] Solar Operation Battery Operation Item Price
HR-03
0-459.2 2.2 nominal voltage 72-96 V DC
open circuit voltage max. 200 V DC
nominal voltage 72-96 V DC 7863609 $1,866
HR-03H
459-787 2.2 7863610 $1,866
HR-04
0-262 3.5 7863611 $1,866
HR-04H
262-524 3.5 7863612 $1,866
HR-07
131-393 5.3 7863613 $1,866
HR-10
98-262 8.3 7863614 $1,866
HR-14
0-196 11.8 7865615 $1,866
HR-20
0-131 15.8 7863616 $1,866
Model
Item Price
Lorentz PS1200 Pump Controller 72-96 VDC
7864505 $608

Lorentz PS1200 Centrifugal Pumps
Centrifugal Model
Lift (feet) Max. Flow Rate [gal/min] Solar Operation Battery Operation Item Price
C-SJ5-8
0-131 33 nominal voltage 48-72 V DC open circuit voltage max. 150 V DC nominal voltage 48 V DC 7863620 $1,866
C-SJ8-5
0- 78 48    
C-SJ12-3
0-49 92    

Flow Rates for each Lift dependent on size of Fixed Solar Array (watts). Chart Based on a 4.5 peak sun hours a day. Production is gallons/day at 48 volts (smaller number) & 72 volts (larger number), 72V - 96V for HR models.
LORENTZ PUMP Lift, ft (Max Vertical Distance of Pumped Water)
Submersible Pump
Model 33 50 100 165 230 265 330 460 600 760
PS 1200 HR/C (72-96 V)
HR-03 (gal/day)           740 580-
630
340-
680
   
HR-03H (gal/day)                 260-
840
260-
740
HR-04 (gal/day)       1240-
1300
925-
1000
         
HR-04H (gal/day)           790-
1030
680-
1400
660-
1500
   
HR-07 (gal/day)       1400 1180-
2300
1300-
2000
1700-
2100
     
HR-10 (gal/day)         2600-
3170
2300-
2900
       
HR-14 (gal/day) 4200-
4500
3700-
4000
1580-
5200
2100-
4700
           
C-SJ5-8 (gal/day) 5800 4700-
6600
6070-
6600
             
C-SJ8-5 (gal/day) 9500-
12400
7900-
12000
               
C-SJ12-3 (gal/day) 17700                  

    Lorentz PS1800 C Submersible Water Pump

Lorentz PS1800 C Submersible Water Pump

The PS1800 C is a submersible water pump that has a high resistance from wear caused by sand or clay and requires no maintenance with high life expectancy. It is made from stainless steel and rubber with easy access for service. The PS1800 C is cost efficient and simple to install. This pump is most useful for deep well pumping, irrigation, potable water supply, and pond management.

There are several models of the PS1800 C pump that are rated differently for lift and flow rate. All models are powered by solar panels that need to have a nominal voltage of 72 – 96 VDC or 6-8 12V solar panels.

lorentz ps1800 C submersible pump
SPECIFICATIONS
Lorentz PS1800 Centrifugal Pumps (call me for models not listed here)
Centrifugal Model
Lift (feet) Max. Flow Rate [gal/min] Solar Operation Battery Operation Item Price
SJ12-3
6- 39 96 nominal voltage 72-96 V DC
open circuit voltage max. 200 V DC
nominal voltage 72-96 V DC    
SJ8-5
6-85 70    
SJ5-8
6-131 48 7863624 $1,866
SJ3-9
98-164 24    

Model
Item Price
Lorentz PS1800 Pump Controller 72-96 VDC
7864506 $608

Flow Rates for each Lift dependent on size of Fixed Solar Array (watts). Chart Based on a 4.5 peak sun hours a day. Production is gallons/day at 72 volts (smaller number) & 96 volts (larger number)
LORENTZ PUMP Lift, ft (Max Vertical Distance of Pumped Water)
Submersible Pump
Model 33 50 100 165 230 265 330 460 600
PS 1800 C (72-96 V)
C-SJ12-3 (gal/day) 500-
7500
1000              
C-SJ8-5 (gal/day) 4000-
11000
2500-
6000
2000            
C-SJ5-8 (gal/day)   2500-
8750
5000            
C-SJ5-12 (gal/day)       1000-
4800
2400        



Lorentz Boost PS150 Surface Pump

LORENTZ PS150 Boost provides city water pressure, anywhere. It has been a standard in home renewable energy systems since 1986. It is economical for domestic water supply, drip irrigation and water purification. Use solar-electric power to provide 250 to 10,000 litres per day from shallow water sources. PS150 Boost can push water as high as 140 meters/460 feet.  1 year warranty.

For 12 V to 24 V systems (1-2 solar modules or batteries in series) uses only one and the same motor and controller for solar direct or battery systems. Same flow at 12 V or 24 V.

LORENTZ PS150 Boost is not submersible, but can draw water from shallow wells, springs, cisterns, tanks, ponds, rivers and streams and push it through miles of pipeline. Slow pumping minimizes the size and cost of the solar array-battery system, wire and piping.

LORENTZ PS150 Boost is more powerful, quieter and much more durable than plastic RV/Marine pumps. It is less expensive than submersible DC pumps. Wearing parts typically last 5 to 10 years. Overall life expectancy is 15 to 20 years.

Applications

Total Lift

PS150 Boost 60

PS150 Boost 125

PS150 Boost 240

[meter/feet]

[flow:
l/hr]

[Watts]

[flow:
l/hr]

[Watts]

[flow:
l/hr]

[Watts]

5.0/16.4

260

35

480

50

900

65

10/32.8

260

40

470

55

900

90

15/49.2

250

45

470

62

890

105

20/65.6

250

55

470

70

880

120

25/82

250

63

460

80

880

135

30/98.4

250

72

450

90

870

150

40/131.2

250

80

450

105

870

200

45/147.6

240

85

450

112

860

225

50/164

240

90

450

120

60/196.8

240

95

430

140

70/229.6

240

110

420

160

80/262.4

240

125

410

185

90/295.2

240

140

410

200

100/328

230

165

120/393

230

185

140/459

220

220

Suction Capacity

5 m (15 ft) at sea level. Subtract 1 m (3 ft) for every 1,000 m (3,300 ft) altitude. Pump should be placed as low and as close as possible to the water source. Suction capacity my be further limited by intake pipe friction (or clogged filter).

Intake piping should be 1" or larger.

Filtration Requirement

This pump cannot tolerate dirt. Water must be filtered clear. If water is very dirty, improve the source or consider a different pump.

PV-Direct (non-battery) Requirements

  • The rated power of the PV array must exceed pump watts by 20% or more.

  • A linear current booster incl MPPT (maximum power point tracking) is already included !

  • Solar Tracker (optional) will increase daily yield (40-55% in summer)

Installation

  • Pump may be mounted horizontally or vertically.

  • Pump must not be submerged

  • It may be placed inside a 6" (120 cm) or larger well casing, suspended by a rope

Accessories

  • Inline Filter: (10") Uses standard filter cartridges

  • Installation Kit includes: Pressure switch, pressure gauge, check, drain and shut-off valves and tank tee.

  • Float switch for tank shut off if full.

  • Well probe sensor to protect pump from dry-running.

Dimensions

  • Pump Unit

  • Length: 33 cm (13")

  • Weight: 7.0 kg (15 lb)

  • Controller

  • 260 x 175 x 100 mm (10" x 7" x 4")

  • Weight: 1.5 kg (3.6 lb)

Warranty

1 year against defects in materials and workmanship

7864507, LORENTZ PS150 BOOST- 60 (pump, motor, controller) ..... $968.00
7864508, LORENTZ PS150 BOOST- 125 (pump, motor, controller) ..... $968.00
7864509, LORENTZ PS150 BOOST- 240 (pump, motor, controller) ..... $968.00


    Lorentz PS600 BADU TOP 12 Surface Pump 48 – 72 VDC

PS600 BADU TOP 12 HIGH VOLUME Surface Pump System 48 – 72 VDC

The PS600 BADU is a centrifugal surface pump that is run on solar power and has a long life expectancy. It is a DC motor that requires no maintenance and is cost efficient. This pump is ideal for water circulation, i.e. irrigation, aquariums, ponds, and pool filter systems.

A solar system needs to have a nominal voltage of 48-72 VDC in order for the pump to run. If a battery source is used, a nominal voltage of 48 VDC is needed. The maximum flow rate and maximum lift depends on the power source (solar or battery).

This pump is intended to provide very high volume at minimal lift and pressure.

PRODUCT SPECIFICATIONS     USER MANUAL

ps 600 surface pump


Flow Rates for each Lift dependent on size of Fixed Solar Array (watts). Chart Based on a 4.5 peak sun hours a day. Production is gallons/day at 48 volts (smaller number) & 72 volts (larger number)
Surface Pump
Model Lift, ft (Max Vertical Distance of Pumped Water)
7 13 33 50 100 150 200 265 330 460
PS 600 (48-72 V)
BADU Top12 (gal/day) 14000-
25100
7100-
19300
2800-
13700
200-
1300
           

7864510, LORENTZ PS600 BADU TOP 12 (pump, motor, controller) ..... $1340.00