RETURN TO VOODOO SOLAR BATTERY PAGE
Select Below
Company Info
Voodoo Solar LLC- Concorde AGM Battery Specifications

MAINTENANCE-FREE, VALVE-REGULATED,
SEALED LEAD ACID BATTERIES.
DESIGNED FOR DEEP CYCLE / BACK-UP POWER
PHOTOVOLTAIC APPLICATIONS.



Part Number Volts Overall Dimensions Unit Wt Nominal Capacity Ampere Hours @
25° C (77° F) to 1.75 volts per cell
Length Width Height Lbs Kgs 1
Hour
Rate		 2
Hour
Rate		 4
Hour
Rate		 8
Hour
Rate		 24
Hour
Rate		 48
Hour
Rate		 72
Hour
Rate		 120
Hour
Rate
in mm in mm in mm
PVX-340T 12 7.71 196 5.18 132 6.89 175 25 11.4 21 27 28 30 34 36 37 38
PVX-420T 12 7.71 196 5.18 132 8.05 204 30 13.6 26 33 34 36 42 43 43 45
PVX-490T 12 8.99 228 5.45 138 8.82 224 36 16.4 31 39 40 43 49 52 54 55
PVX-560T 12 8.99 228 5.45 138 8.82 224 40 18.2 36 45 46 49 56 60 62 63
PVX-690T 12 10.22 259 6.60 168 8.93 227 51 23.2 42 53 55 60 69 73 76 79
PVX-840T 12 10.22 259 6.60 168 8.93 227 57 25.9 52 66 68 74 84 90 94 97
PVX-890T 12 12.90 328 6.75 172 8.96 228 62 28.2 55 70 72 79 89 95 98 102
PVX-1040HT 12 13.12 333 6.60 168 8.93 227 66 30.0 65 82 85 93 104 112 116 120
PVX-1040T 12 12.00 304 6.60 168 8.93 227 66 30.0 65 82 85 93 104 112 116 120
PVX-1080T 12 12.90 328 6.75 172 8.96 228 70 31.8 68 86 88 97 108 118 122 126
PVX-2120L 12 20.76 527 8.70 221 9.76 247 138 62.7 136 172 176 194 212 235 244 253
PVX-2580L 12 20.76 527 10.89 277 9.77 248 165 75 165 209 214 236 258 285 295 305
PVX-1030T 6 10.21 259 6.60 167 8.92 226 42 19.1 65 82 85 93 103 112 116 120
PVX-1380T 6 10.21 259 6.60 167 8.92 226 51 23.2 84 106 110 120 138 146 151 158
PVX-2240T 6 10.28 261 7.06 179 10.0 254 67 30.4 143 180 185 204 224 246 256 263
PVX-3050T 6 10.28 261 7.06 179 13.02 330 91 41.3 190 245 270 280 305 335 348 358
PVX-5040T 2 10.21 259 6.60 167 8.93 226 57 25.9 312 396 408 444 504 540 561 582
PVX-5340T 2 12.90 328 6.75 171 8.96 228 62 28.2 330 420 432 474 534 570 591 612
PVX-6240T 2 12.01 305 6.60 168 8.93 227 66 30.0 390 492 510 558 624 672 696 720
PVX-6480T 2 12.90 328 6.75 171 8.96 228 70 31.8 408 516 528 582 648 708 732 756
PVX-6720T 2 10.28 261 7.06 179 10.0 254 70 31.8 429 540 555 612 672 738 768 789
PVX-9150T 2 10.28 261 7.06 179 13.02 330 94 42.6 570 735 810 840 915 1005 1044 1104


Click to View Sun Xtender Battery Teminal Types

Standard Terminals: All batteries with a “T” at the end of the part number incorporate M8 (copper alloy) threaded insert terminals except as follows: PVX-340T & PVX-420T are M6 and PVX-2120L & PVX-2580L are “L” Blade (solid copper) terminals. All batteries are supplied with silicon bronze bolts, nuts, and washers required for installation.

Optional (Copper Alloy) Terminal Installed at the Factory: Batteries with a “T” at the end of the part number (except PVX-340T & PVX-420T) are available with an optional factory installed “A” SAE automotive type terminal by adding the appropriate suffix to the end of the part number. For example, order PVX-1040TA instead of PVX-1040T.

Optional (Copper Alloy) Terminal Kit: Kits can be ordered for “After Factory” customer conversions of “T” type batteries (except PVX-340T & PVX-420T) by ordering P/N 6918 for the “A” SAE automotive post kit. Kit includes terminals and installation bolts required for installation.

Terminal Torque Values: [M6 use 35 in-lbs / 4.0 nm.] [M8 use 70 in-lbs / 7.9 nm.]

Handles: All batteries include built in lifting handles except the PVX-490T and PVX-560T.

Ratings: Capacity ratings are after 15 cycles and are stated at 77°F (25°C) to 1.75 volts per cell.

For more information, click on the battery part number in the table above or contact the factory. Never install batteries in a sealed compartment or container.


SUN-XTENDER® BATTERY DESIGN FEATURES
  • Copper Alloy Terminals for improved electrical connections.
  • No exposed lead terminals. This change was incorporated to improve environmental safety and health.
  • Threaded insert terminals are recessed to prevent short circuits across battery connections.1
  • New cover is flat top design. No protruding or exposed vent valves.1
  • Built in lifting handles, except PVX-490T and PVX-560T.
  • Reinforced container walls to reduce bulging.
  • High Impact Strength Copolymer Polypropylene Case and Cover.
  • Completely Sealed Valve Regulated Construction.
  • Immobilized Electrolyte Non-Spillable.
  • Maintenance Free Design Never Requires Watering.
  • Absorbed Glass Mat (AGM) Micro-porous Glass Separators retain electrolyte.
  • Flame Arresting Pressure Regulated Safety Valves.
  • UL Recognized Systems Component.
  • Positive Plates - Proprietary Lead Calcium Alloy- Negatives Plates - Lead Calcium.
  • Low Self Discharge Rate Approximately 1 % per month at 25°C (77°F).
  • Operate over a Wide Range of Temperatures from -40°C (-40°F) to +72°C (+160°F).
  • Classified as "Non-Spillable Battery" for transport. Complies with DOT HMR49, Non-Hazardous Materials.


    • 1 Threaded Insert "T" type Features.

    CHARGING INSTRUCTIONS
    Initial charge or recharge: 2.39 to 2.41 volts per cell at 25° C (77° F). Float charge: 2.20 to 2.22 volts per cell at 25° C (77° F). Conditioning charge: 2.60 volts per cell at 25° C (77° F) not to exceed 8 hours. Temperature compensation = ±3.75 mV. per cell per degree C [Reference to 25° C (77° F)]. This is for battery temperature (not ambient temperature) and is useful for battery temperatures from 0° C (32° F) to 40° C (104° F). Refer to Technical Manual for temperatures that exceed this range.

    Specifications subject to change without notice.

    The data/information contained in the Sun Xtender official website has been reviewed and approved for general release on the basis that these documents contain no export-controlled information.
    Sun Xtender Solar Batteries 
     

    Sun Xtender® Battery Produces the Highest Quality Solar Energy & Wind Power Batteries,
    Renewable Energy Storage Batteries, Deep Cycle Batteries, and AGM Batteries

    All Rights Reserved. © 1996-2008
    Built by Broomfield Designers Hosted at Broomfield-Designers.com